Skip to end of metadata
Go to start of metadata

Problem

I'm having issues with the turntable and camera.  After snapping first shot it stays at 0% and stops taking pictures and turntable doesn't rotate.

Solution

Most like issue is that the camera is set to RAW capture only and you need to set it to take JPG images.

Here are a few things to try:
  1. Make sure that the camera is set to taking JPG or JPG+RAW. Most likely, you have the camera set to RAW images only.
  2. Make sure that you can capture multiple images outside of the 360 capture more.
  3. Make sure that the turntable rotates by itself. Press the PLAY and STOP buttons in the 360 dialog and make sure that the table works. If it does not, then you need to troubleshoot the table first.