360 Product View Shooting Specs

Total Process Time to Create Web-ready 360 Product View: ~8 minutes

Frame Count: 72 frames/360 rotation (1 capture every 5 degrees)

Turntable: Platinum LRG 360 Product Photography Turntable

Software Used: Shutter Stream 360 Product Photography Software

Additional Accessory Used: N/A

Camera/Lens Used: Canon EOS 1100D with Canon EFS Macro Lens 60mm f/2.8 

Zoom Level: Fixed

Flash: No

Lighting Used: Medium LumiPad 360 Product Photography Lighting System

File format: PNG

360 Product View Description

    Creating a professional multirow 360 project doesn't require professional photography skills. After following this article, you will be able to create your own professional 360 multirow projects and learn the entire process on how multiple rows work. In the following example we used a hand-built Harley Davidson motorcycle with 3 different rows. 

    We can also use pre-crop feature from Shutterstream or manually crop using the editor all of your resulted multi-row images to fit perfectly when switching from one row to the second row and so on. Use a ruler to measure the distance between your camera lens ← and → your object placed on the turntable.

    In this example we used a Macro Lens 60mm with F 2.8, distance 105 cm / 41 inch. We've made sure that our object is aligned in the center of the turntable in order to avoid the object going outside the boundaries(in this Harley Davidson example, aligning is crucial in order to keep your object spinning symmetrical in all 360 frames).

    After we finally created our project, it's time to share the generated iframe and index links and embed them on our website. In this example the generated iframe link was shared from https://stream.iconasys.com and embedded into a HTML plugin on this page.