Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


HTML
<iframe src="https://stream.iconasys.com/viewer.php?application=360&type=index&id=94ffbbffbc3ca3016046fb75285ceb3de56ac2a7" noborder="0" scroll="auto" scrolling="yes" allowFullscreen="allowFullScreen" frameBorder="0" style="height:550px;width:100%"></iframe>


Total Process Time to Create Web-ready 360 Product View: ~8 minutes

Frame Count: 72 frames/360 rotation (1 capture every 5 degrees)

Turntable: Platinum LRG 360 Product Photography Turntable

Software Used: Shutter Stream 360 Product Photography Software

Additional Accessory Used: N/A

Camera/Lens Used: Nikon D7000 with Nikkor AF-S 35mm Prime Lens f/1.8 

Zoom Level: Fixed

Flash: No

Lighting Used: Medium LumiPad 360 Product Photography Lighting System

File format: JPG

    Creating a professional 360 project doesn't require professional photography skills. After following this article, you will be able to create your own professional 360 project and learn the entire process on how everything is set up. In this example we used a Prime Lens 35mm and aperture set to f/5.6. We've made sure that our object is aligned in the center of the turntable in order to avoid the object going outside the boundaries(in this example, aligning is crucial in order to keep your object spinning symmetrical in all 360 frames).

When it comes to symmetrical objects You can use 3 types to place the object equidistant, in the center of the 360 frames.

  • using classic geometry method with a ruler to measure the center of a circle (view Fig 1)

  • using the Live view guide lines 

  • using the Crop tool to center your object

Fig. 1

    After we finally created our project, it's time to share the generated iframe and index links and embed them on our website. In this example the generated iframe link was shared from https://stream.iconasys.com and embedded into a HTML plugin on this page.