Can I customize my own turntable to work with the Shutter Stream 360 software
|Shutter Stream has an Arduino controller turntable plugin that you can use to control a serial communication based turntable, with certain limitations.|
The Arduino turntable controller communicates with the Iconasys Arduino turntable using the following commands:
|c||Stop - Cancel shot sequence or preview and return to start position|
|p||Preview rotation. One single full rotation.|
|v||Echos back turntable type and it's used for auto detection and to determine the number of steps per rotation.|
Response from "v" determines the number of steps per revolution, which together with the number of steps to rotate ("x####") determines the angle of the rotation. You must end the response with "\r\n" characters. Your application must respond with one of the following ASCII strings when the "v" command is received:
Note that Build version can be anything. It's only used to display version number.
|o||Set Starting position as current location|
|r||Return the turntable to the starting position|
|x####||Step a specific number of steps (1-1024)|
Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.